Shock absorbers and suspension are the parts that keep a vehicle's
wheels in contact with the road surface, allowing the tyres to grip and
ensuring the best possible road holding, stability and braking.
Access myFiatProfessional and discover what Fiat Professional has for you in its dedicated area
The suspension system of the vehicle is a complex structure that consists of several components:
Vehicle manufacturers have developed a large number of systems to improve safety and control, including ESC (Electronic Stability Control).
When the ESC system detects that the vehicle is drifting, that the angle of body roll is too great, or that the tyres are starting to lose grip, it instantly reduces power output from the engine and applies the brakes individually with the force needed to keep the vehicle under control.
Shock absorbers are the heart of your vehicle's suspension system. They absorb the effects of uneven surfaces, reduce vibration and keep the tyres in constant contact with the road under all driving conditions. Stability and safety therefore depend on them.
Shock absorbers control the movement of the springs, damping rapid
compression and rebound movements. They also prevent the tyres from
losing contact with the road surface, which could lead to aquaplaning
and extended stopping distances as well as irregular tyre wear.
Vehicles in the more prestigious market segments are fitted with electronically controlled shock absorbers and a dedicated ECU.
The forces generated by a vehicle in motion are
extremely complex and very difficult to control, as they occur along
many different axes.
In the architecture of a suspension system, the purpose of the springs is to support the weight of the vehicle and to absorb the stresses imparted by the road surface, keeping the vehicle body in the correct attitude with respect to the road. Springs are continuously subject to movements of compression and rebound.
Springs are subject to wear: over time, continuous stress leads to
fatigue and causes them to lose their elasticity. Springs gradually lose
their ability to return to their original size as the result of
stress-induced fatigue. Used springs will therefore be longer than new
There are many good reasons for monitoring the condition and
functioning of the springs in your vehicle's suspension, and changing
them as soon as fatigue is detected. For a start, springs in good condition ensure easier driving and better directional control.
They also extend the working life of the shock absorbers and other
suspension components (including the tyres) and maintain the correct
clearance between your vehicle and the ground.
When replacing springs as the result of fatigue or breakage, always replace them in right and left pairs<. It is also best to replace the shock absorbers at the same time (again right and left together).
As is the case with shock absorbers, replacing just one spring will
cause imbalance between the wheels concerned, leading to significantly
poorer braking and handling.
The control arms also form an integral part of the suspension system as they connect the wheels to the chassis, permit steering and allow the shock absorbers to oscillate.
The rubber and metal bushes on which they are mounted also limit the
transmission of vibration from the road to the passenger compartment.
When driving over rough surfaces, always take care to avoid hitting holes and bumps at high speeds, as accidental impacts can easily damage the suspension's control arms. Frequent driving over bad road surfaces can negatively affect the performance of your suspension system.
Wheel bearings are mechanical devices used to reduce friction between two mating parts that rotate on the same axis. Wheel bearings play an essential role in allowing the wheels (driven or non-driven) to rotate with respect to the chassis while supporting the loads applied to them.
Bearings consist of a number or rolling elements (balls or rollers)
fitted inside a temperature-resistant cage, plus two retaining rings. So how can you tell if a bearing is defective or worn?Wheel
bearings are subject to wear but cannot be adjusted or serviced. They
must therefore be replaced as soon as you perceive noise coming from the
wheels at speeds between 50 and 75 mph.Wheel bearings can deteriorate as the result of:
Worn or damaged bearings can affect road holding and cause rapid wear
in other wheel and suspension components. Ball type wheel bearings must
be replaced as soon as you perceive noise coming from the wheels.
Constant velocity joints are important mechanical components between the gearbox and the wheels. They transmit torque and power from the gearbox to the drive wheels, thus generating traction. They also assist the action of the shock absorbers.
Dust and dirt are prevented from entering the CV joints by boots made from thermoplastic elastomers (materials chosen for their ability to resist aging, thermal shock and accidental impact). Original CV joints distributed by Mopar® are made from special, boron and chromium enriched steel to ensure resistance to high temperatures and greater reliability.
While CV joints are designed to last for a very long time, many factors can reduce their useful life and make replacement necessary:
Have your CV joints thoroughly checked every 2 years.
Shock absorbers wear slowly and gradually, affecting suspension components like tyres, springs and other mechanical parts.
Drivers tend to compensate for the reduced efficiency of their shock
absorbers by adapting their driving style, often without noticing they
are doing so. Proper vehicle maintenance, however, is essential to active safety. It is estimated that over 50% of cars on the road have worn or damaged shock absorbers. Warning! Worn shock absorbers reduce stability and roadholding, especially on bends,
and also increase stopping distances. Worn shock absorbers can increase
your stopping distance from 50 mph by 2 or even 3 metres.
Your shock absorbers and springs work together to keep your tyres in contact with the road. If your springs are worn, they can fail and cause additional stress to your shock absorbers. To ensure maximum tyre grip, always replace shock absorbers and springs together, in front and back pairs. Ask your Authorised Fiat Professional Service Centre for advice: they will be happy to recommend the best repair solution for your needs.
"Instrumental or mechanical science is the noblest and above all others the most useful, seeing that by means of it all animated bodies which have movement perform all their actions", Leonardo da Vinci.
Leonardo da Vinci discovered the principle of the ball bearing back in the 15th century, when studying friction. He understood that friction would be reduced if the balls were prevented from touching each other.
He therefore developed a device to keep them apart while allowing them to rotate freely - the forerunner of the modern ball bearing cage.
The world nevertheless had to wait until the Industrial Revolution before ball bearings came into general use in industrial applications. The first ball bearing patent was proposed in 1794.
Shock absorbers have a direct effect on:
To extend the working life of your shock absorbers:
On average, shock absorbers should be replaced every 80,000 km. The rate of wear, however, depends on how you use your vehicle and your driving style.
For comprehensive servicing, Mopar® Vehicle Protection offers you pre-paid service packs, for scheduled servicing as well as the replacement of the parts most subject to wear. The Mopar® Vehicle Protection servicing plans protect you against unexpected maintenance costs and possible price increases, as every plan includes a fixed discount for the duration of the plan on original used spare parts.
To understand when your shock absorbers need replacing, take note if your vehicle develops the following anomalies:
When should you replace the control arms?
As soon as you notice any of these faults, have your vehicle checked at an Authorised Fiatprofessional Service Centre.
Fiat Group Automobiles - P. IVA 07973780013